For your Carnauba Paint Protection system.
Dark Energy is a premium, high oil content Booster, designed primarily for use with Dark Matter Wax as maintenance.
PGS (Product Grading System) Scale
Protection
Dark Energy Boost: 2
Seal STRONG: 8
Boost: 1
Dark Matter Wax: 6
FMJ (Full Metal Jacket): 10
_______________________
Depth of Colour
Dark Energy Boost: 10
Seal STRONG: 5
Boost: 2
Dark Matter Wax: 10
FMJ (Full Metal Jacket): 6
_______________________
Gloss & Reflection
Dark Energy Boost: 10
Seal STRONG: 5
Boost: 8
Dark Matter Wax: 10
FMJ (Full Metal Jacket): 5
_______________________
Durability/Longevity (Wax Life)
Dark Energy Boost: 1
Seal STRONG: 8
Boost: 1
Dark Matter Wax: 4
FMJ (Full Metal Jacket): 10
_______________________
Skill Level Required
Dark Energy Boost: 1
Seal STRONG: 1
Boost: 1
Dark Matter Wax: 2
FMJ (Full Metal Jacket): 8
Dark Matter on a Black 911 (996) Carrera
IMAGES
_____________________________
Application of Dark Energy
Video Instruction
Dark Matter Wax should be applied first and allowed to Cure (48 Hours) -see below
Shake Dark Energy VERY well before each and every use.
Spray Dark Energy directly onto clean, cool & dry paintwork and buff to a high gloss with the plush side of a fresh/clean and dry Final Inspection Nanofibre Paintwork Cloth turning frequently.
One spray per panel is enough.
Don't re-apply coats of Dark energy until it has cured (48 hours).
If smears are present during application, use less product, check Paintwork Cloth, if loaded, replace with another clean & dry cloth.
_____________________________
Application of Dark Matter Wax
As usual, apply to a clean car.
If layering; apply Dark Matter Wax directly to the underlying layer without any prep other than the standard, recommended wash & dry.
If Dark Matter is the first Paint Protection coat; apply Dark Matter Wax directly to the Paintwork treated with the standard, recommended wash & dry and followed by a Cleanse with either Cleanse LIGHT or REGULAR. A Decontamination is highly recommended. A Paint Correction (polish) is also recommended.
Dark Matter is the only Final Inspection product that can be applied to warm panels and in direct sunlight, however, it is HIGHLY recommended to apply Dark Matter to cool paintwork in a dust-free environment out of direct sunlight if possible.
About 50-75ml of Dark Matter is necessary to cover an entire car.
1 Work on 1 panel at a time. Apply a 20c coin sized pump of Dark Matter to Microfibre Paintwork Applicator and then apply to Paintwork Surface by massaging the wax in slightly overlapping circular motions. No pressure is required and it is not required to work the product too much. Allow Dark Matter Wax to bond (haze/flash) for approx. 2 minutes. (Remove immediately in hot application, do not allow to bond at all).
2 After Bonding time, Remove Dark Matter with a Dry Final Inspection Nanofibre Paintwork Cloth. If necessary (especially in hot application), remove Dark Matter with a very slightly damp Final Inspection Nanofibre Paintwork Cloth, followed by Dry Paint Cloth.
Machine Application
Dark Matter can be applied by machine, but it is not necessary and no benefit will be had. If you prefer to apply by machine, a Final Inspection Black LD Ultra Fine Polishing Pad is recommended.
Allow Dark Matter Wax to cure for 48 hours before any washingof the vehicle or layering of wax.
It is recommended not to apply Dark Energy Booster until after the Wax layer has cured and only to a clean & dry surface.
It is recommended to layer Dark Matter with itself up to 3 layers before maintenance with Dark Energy Booster.
